On a hot summer day the water in a small country pool is heated obviously. After the weather is overcast heating time is extended or, in general, the temperature does not achieve a comfortable temperature of +22oC. In large pools organic heating takes much longer. To solve this problem, created a heater for the pool, working out of various energy resources.

The simplest water heater for the swimming pool is an heat exchanger. The foundation of this design is a tank, by which the liquid flows. It is linked to the heating system or some other heating water heater. In the tank is an integrated coil. This component is that the heat exchanger. Pool water circulates throughout the coil, heating against the liquid in the tank.

Why do you want such a complicated pool heater if you can just run the water directly through the heater? You can use such a strategy, however there are two problems:

If heated, they settle on the walls of this heat exchanger because of solid sludge, clogging it.

  • Pool water is filled with oxygen, which oxidizes the metallic walls of this heat exchanger.
  • To pricey boiler or flow heater does not neglect, the heating system is equipped with a second loop. The heat exchanger is easier and more economical to change whether it becomes clogged or leaks from oxidation of these walls.

    In a small children’s pool piping is put on the principle of the machine”underfloor heating”. A little bit of water the coil will heat immediately, and with a massive volume won’t cope. Electric models

    The second most popular is an electric heater for your pool, consisting of a machine, heating elements and a thermostat. Devices come in two types:

    • Accumulation. The system is made up of huge tank, where the water is heated from the heating components, and from there it is fed to the pool.
    • Flow-through. remonttool.ru The unit is connected to the water treatment system of the pool. There’s a filter in the front of the water heater, which moves pressurized water, which gets rid of the creation of strong deposits.
    • Based on the capability, the devices are connected to single-phase and systems that are interpersonal. When calculating, the following parameters have been considered:
    • per 1 m3 of water of an open swimming pool – 1 kW of heating element energy;
    • 1 m3 of water via an indoor swimming pool – 0.5 kW of heating components electricity.

    The need to warm a massive quantity of water demands the usage of strong devices. Electricity costs are huge, plus you need to put a separate field of pipes. Heating pump

    Rather complicated from the device of the heater for the pool pump describes advanced technology. The unit is efficient and cost-effective, but it’s rarely used due to its high price.

    Significant: The heat pump operates to the principle of the fridge, just here the circuit which releases heat, not cold, is in demand.

    The machine is made up of two circuits, in which the fluid circulates. The outer pipe can be placed underground, in the bottom of the reservoir or other location where you are able to extract heat. The interior circuit is placed within the pool. It provides the water the heat extracted by the outer pipe.